Telex Switching and Email Integration
Telex Switches and PAD products are based on the TURBO product
platform, specifically the NanoTURBO (TLX-25/6), MicroTURBO (TLX25/10),
and PACIII (TLXIII),
and have the same multi-protocol capabilities. All products accommodate
standard Telex Trunk or Subscriber signaling, Async, and X.25 protocols.
All products offer full real-time inter-working capability between
Telex and Async or X.25/FR/IP
Switches and PAD Platforms:
TLX25/6 provides 4 Telex ports and 1 X.25 port
TLX25/10 provides up to 8 Telex ports and 2 X.25 ports
TLXIII provides up to 240 Telex ports
Full capabilities to support X.25, Frame Relay, and TCP/IP
simultaneously with Telex
Up to 20,000 lines with TLX25/III
Internal bus is X.25 at 9600 bps
Full set of standard Telex features
Telex ports can be intermixed with Async or X.25 ports
Up to 480 ports per cabinet with Line Converters or 1440 lines
Utilize X.25, Frame Relay, or TCP/IP network for Telex Trunks
or Conventional Telex Trunks.
Line Converters available to convert TURBO V.24/V.28 interface
to FSK or Current Loop:
M44 provides 4 ports for conversion to either FSK or current
M4040 is a modular chassis which will take up to 10 four port
line converter cards. Cards may be FSK or Current Loop. An integral
65 vdc loop supply is included. Line interface is via 50 pin
M120 is a modular chassis which will take up to ten 12 port
current loop or FSK converter cards. An integral 65 vdc loop
supply isincluded. Line interface is via 50 pin Telco connectors.
Runs in any standard PC
Communicates with TLX Nodes via dedicated dial up modems and
Users can send telex or data messages in conversational or
file transfer modes.
Operates in background so normal PC operations are not effected.
Allows message composition then automatic transmission.
Reduces Telex exchange port requirements